TES-3079k TRMS AC 클램프메타(1000A,RMS)
- AC 전압 : 600.0V - AC 전류 : 999.9A - DC 전압 : 600.0V - ㎂ Trms : (AC+DC) : 999.9㎂ - 메가옴 : 99.99MΩ - 저항 : 999.9kΩ - 캐패시턴스 : 7000㎌ - 온도계 : -50℃~1000℃ - 도통 실험 - 다이오드 테스트 : 2.000V - True 파워 : 600.0kW - Apparent 파워 : 600.0kVA - 위상 각 : -45˚~+45˚ - 주파수 : 45Hz~1KHz - 디스플레이 : 이중 디스플레이, 4 digital LCD maximum reading 9999 (10,000 Count Reading) - 배터리 방전 표시 - 배터리 수명 : 약 80 시간 - 자동 전원 오프 기능 : 약 30 분 - 크기 : 228(L) x 76(W) x 39(H)mm - 무게 : 약 465g - 클램프 크기 : Cables Φ40mm - 악세사리 : Carrying case, Test leads, Battery(one 006p 9V), One pair of alligator clip & Instruction manual
< 제품특징 >
HVAC Application :
- Check current draw in motors and compressors
- Use MAX/MIN/Recording in the temperature mode to assess efficiency
- Test run/start capacitors
- Confirm low voltage control signals
- Measure flame safeguard device current draw
- Confirm power sources
- Analyze temperature and power data with the aid of the time stamp
- Insulation test up to 100MΩ
Electrical Application :
- Check for energized circuits
- Balance loads
- Evaluate electrical contacts
- Capture motor in-rush current readings
- Determine peak power demand periods
- Verify line voltage stability
- Monitor motors and other loads for excess heat
- Check motor run/start capacitor values
|
< 제품사양 >
ELECTRICAL SPECIFICATIONS : (23℃±5℃)
■ AC Current(50Hz to 400Hz): Trms
Range |
Resolution |
Accuracy |
Sensitivity |
Overload
protection |
99.99A |
10mA |
±2%±20dgts(50,60Hz) ±4%±20dgts(40-400Hz) |
0.10A |
1000A |
999.9A |
100mA |
1.0A |
■ ㎂ Trms : (AC+DC) (Burden Voltage : 5mV/㎂)
Range |
Resolution |
Accuracy |
Sensitivity |
Overload
protection |
99.99㎂ |
10nA |
±1% ±20dgts |
0.20㎂ |
600V |
999.9㎂ |
100nA |
2.0㎂ |
■ AC Voltage(50Hz to 400Hz): Trms
Range |
Resolution |
Accuracy |
Sensitivity |
Overload
protection |
999.9mV |
0.1mV |
±1%±20dgts(50,60Hz) ±2%±20dgts(40-100Hz) |
2.0mV |
600V |
9.999V |
1mV |
±1%±20dgts(50,60Hz) ±2%±20dgts(40-400Hz) |
0.020V |
99.99V |
10mV |
0.20V |
600.0V |
100mV |
2V |
input impedance : 3MΩ
■ DC Voltage
Range |
Resolution |
Accuracy |
Sensitivity |
Overload
protection |
999.9mV |
0.1mV |
±1.0% ±20dgts |
2.0mV |
600V |
9.999V |
1mV |
0.020V |
99.99V |
10mV |
0.20V |
600.0V |
100mV |
2V |
input impedance : 3MΩ
■ Resistance(Continuity<40Ω on the 999.9Ω range) :
Range |
Resolution |
Accuracy |
Overload Protection |
999.9Ω |
100mΩ |
1% ±10dgts |
600V |
9.999KΩ |
1Ω |
99.99KΩ |
10Ω |
999.9KΩ |
100Ω |
■ MΩ :
Range |
Resolution |
Accuracy |
Overload Protection |
9.999MΩ |
1KΩ |
5% ±10dgts |
600V |
99.99MΩ |
10KΩ |
■ Capacitance :
Range |
Resolution |
Accuracy |
Overload Protection |
10.000㎌ |
1nF |
1.5% ±5dgts |
600V |
100.00㎌ |
10nF |
1000.0㎌ |
100nF |
7000㎌ |
1㎌ |
2.5% ±15dgts |
■ Diode(Continuity<40mV) :
Range |
Resolution |
Accuracy |
Overload Protection |
2.000V |
1mV |
±2% ±1dgts |
600V |
■ Temperature (K-Type thermocouple) :
Range |
Resolution |
Accuracy |
Overload Protection |
-50℃ to 900℃ |
0.1℃ |
1% ±1℃ |
30VAC or 60VDC |
-58℉ to 1000℉ |
0.1℉ |
1% ±2℉ |
■ TRUE Power : (PF>0.7 or θ<45˚)
Range |
Resolution |
Accuracy |
Overload Protection |
60.00KW(<100A) |
10W |
±5%rdg ±20dgts(50,60Hz) |
600VAC/1000AAC |
600.0KW(>100A) |
100W |
■ Apparent Power :
Range |
Resolution |
Accuracy |
Overload Protection |
60.00KVA(<100A) |
10VA |
±2.5%rdg ±20dgts |
600VAC/1000AAC |
600.0KVA(>100A) |
100VA |
■ Phase Angle :
Range |
Resolution |
Accuracy |
Sensitivity |
-45˚~+45˚ |
0.1˚ |
±3.0˚ |
ACV>100V, ACA>10A |
■ Frequency :
Range |
Resolution |
Accuracy |
Sensitivity |
45Hz~1KHz |
0.1Hz |
±0.5%rdg ±2dgts |
ACV>0.2V, ACA>6A |
GENERAL SPECIFICATIONS :
Maximum voltage betwer any terminal and earth ground : 600Vrms
- Numerical Dual Display : Dual display, 4 digital LCD maximum reading 9999
(10,000 Count Reading)
- Battery Life : approx. 80hr
- Low Battery Indication : The is displayed when the battery voltage drops
below the operating voltage
- Auto power off time : Approx. 30 minutes
(To disable Auto Power off, please refer to 4-9)
- Sampling Rate : 2.5 times/sec(Digital Dispaly)
1 times/6 sec (on KW, KVA)
- Jaw opening diameter : Cables φ40mm
- Operating temperature and humidity : 0℃ to 50℃(32℉ to 122℉)
R.H.< 80% no-condensing
- Temperature coefficient : 0.1 x (specified accuracy)/℃
(<18 or >28℃, <64 or >82℉)
- Storage temperature and humidity : -10℃ to 60℃(14℉ to 140℉)
R.H.< 70% no-condensing
- Dimensions : 228(L) x 76(W) x 39mm(H)
- Weight : Approx. 465g
- Accessories : Carrying case, Test leads, Battery(one 006p 9V),
One pair of alligator clip & Instruction manual |